modular heat pump
modular water heat pump
modular type air source water heat pump
heat pump  modular
air source modular heat pump
master heat pump
master module
air source heat pump
water scroll heat pump
scroll type air source heat pump

60 Modular Type Air Source Heat pump modular heat pump

Brand AC+
Unit set
Min order 1
Supply ability 1000 sets per month
Payment 50% as deposit rest before delivery
Port Tianjin or other port of China
Certification ISO9001/14001/18001
Place China
Packaging Export standard package
Send Inquiry


    60 Modular heat pump The master module heat pump can work independently or together with up to 7 slave modules, capacity from 65 to 520kW.

    Air source modular units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

    Air source water heat pump Units with U type heat exchanger: bearing structure in aluminum, panels in stainless steel, and base in painted section steel.  

    Scroll heat pump 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

    External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

    Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.

    Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.



    R22 modular heat pump Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.

    Modular water heat pump Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.

    Electric panel consist of: compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)

    Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.


¨   Paddle flow switch;

¨   Metallic filter for hydraulic circuit;

¨   Water pump;

¨   Rubber antivibration mounting.

¨   Heat recovery functions



AC+LS  QW  R  F  C  60  U  M

1、Water heat pump

2、Hermetic scroll compressor

Ž3、 Unit type:

R : heat pump

-- : cooling only

4、 Air source  

5、Refrigerant type

--: R22

A: R410a

B: R290

C: R407c

‘6、 Size

 7、Finned heat exchanger type

    V: V type coil

“ 8、Module type

M: master module

S: slave module

      P: packaged type


* Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;

** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;

*** In the nominal water flow condition the pressure drop is between this range.

**** Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field.



modular heat pump

60 Modular Type Air source Water Heat pump/Modular Heat pump 17ton-147ton R22 modular heat pump


Cooling capacity: 65÷520 kW

Heating capacity: 70÷560 kW