air to water chiller unit
air to water heat pump
air to water scroll chiller
air to water scroll heat pump
air source heat pump
air source scroll heat pump
air source water heat pump
packaged air source heat pump
r410a air source water heat pump
scroll type air source heat pump

Air Source Heat Pump 1.5Ton -5.5Ton R410A air to water chiller unit

Model AC+H(R)AF 05÷30
Brand AC+
Unit set
Min order 1
Supply ability 1000 sets per month
Payment 50% T/T as deposit rest before delivery
Port Tianjin
Certification ISO 9001/14001/18001
Place China
Packaging Export Standard Package
Send Inquiry


air to water chiller unit


Air source scroll heat pump  /Mini heat pump  Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.


Scroll Heat pump  with Single phase (mod.05÷10) compressors, 3-phase scroll compressor (mod.12.5÷30), with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.

Models 7÷10 are available also with 3-phase scroll compressor and mod.12.5 with single phase scroll compressor.


Air source heat pump  External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.


R410A heat pump  High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.


Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill. 


Air to water heat pump  with Copper tube connection with charge valve, filter drier (filter for 05÷8.5), gas-liquid separator, thermostatic expansion valve (expansion capillary tubes for mod. 05÷8.5), low pressure switch with automatic reset, high pressure switch with manual reset.

The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.


Vertical heat pump  Built with air vent valve, water drain connection, water circuit safety valve, water pump, male-threaded hydraulic connectors and inertial water storage tank.


consists of:  

Compressor contactor;

Water pump contactor;

Compressor protection breaker;

Water pump protection breaker

Fan motor protection breaker;

Control circuit protection breaker;

Phase sequence relay (only for 3-phase power supplied units);

Fan speed regulator (Optional);

Programmable microprocessor controller;


AC+H     R     A     F   05  L

 Mini heat pump

 Unit type:

R : heat pump

-- : cooling only 

Refrigerant type

--: R22

A: R410a

B: R290

C: R407c

Air cooled

 Size

‘ Air discharge

--: Top discharge

L: Side discharg


* Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;

** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;

*** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a dear field (fan side).


Mini Heat pump  /Air source Scroll Heat pump  with Axial Fans, Scroll Compressors, Water Pump and Storage Tank 1.5Ton -5.5Ton R410Aa

air to water chiller unit

AC+H(R)AF 05÷30

Cooling capacity: 5.8÷26.3 kW

Heating capacity: 6.3÷31.2 kW